| Last Modified: 11-29-2007 | 1.6 D | |
| Service Category: Vehicle Exterior | Section: Sliding Roof/Convertible | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000030QM004X |
| Title: SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SYSTEM: CUSTOMIZE PARAMETERS (2008 Sequoia) | ||
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream ON.
(d) Enter the following menus: Customize Setting.
(e) Select the setting by referring to the table below.
Sliding Roof
|
Display (Item) |
Default |
Content |
Setting |
|---|---|---|---|
|
Door Key Related Operation |
SLIDE |
Function to select either tilt up or slide open for the manual sliding roof operation linked with power window, which is activated by holding the driver door key in the unlock position for 3 seconds or more when the ignition switch is off. |
Tilt/Slide |
|
Door Key Related Open |
ON |
Function to manually open the sliding roof linked with power window by holding the driver door key in the unlock position for 3 seconds or more when the ignition switch is off. |
ON/OFF |
|
Door Key Related Close |
ON |
Function to manually close the sliding roof linked with power window by holding the driver door key in the lock position for 3 seconds or more when ignition switch is off. |
ON/OFF |
|
|